It is strictly forbidden to modify the structure and circuit of the generator set without permission, and it is forbidden for untrained personnel to operate the equipment, which may cause danger to life! ! ! Ensure that the air intake system is airtight and does not leak. Clean or replace the air filter element in time according to the usage of the filter. It should be replaced in time when it fails. To ensure the tightness of the natural gas supply system, clean or replace the high-pressure filter, the high-pressure solenoid valve and the filter element in the high-pressure reducer in time according to the daily maintenance situation. Ensure that the high-quality natural gas special lubricating oil and oil filter are regularly replaced according to the requirements of the instruction manual, and the oil should be added strictly according to the marking line of the oil dipstick, not too little or too much.This is very inportant for natural gas generator set. Make sure to use high-quality antifreeze coolant according to the requirements of the instruction manual, and do not use natural water directly. Do not open the radiator cap when the engine is hot to prevent burns from the hot air. Make sure to use the gas that conforms to this model according to the requirements of the instruction manual. Before starting the engine each time, check the oil, coolant level, and the tightness of the air intake system. Ensure that the use, inspection, maintenance and repair are carried out according to the instruction manual. To prevent the wiring harness from being short-circuited, do not wash the engine wiring harness with water. If it is found that there is water in the connector part of the wiring harness, apply cold air to dry it before starting the engine. During welding, in order to prevent the welding current from burning out the engine ECU, the main power supply of the engine must be turned off, and the positive and negative terminals of the battery must be removed. For unknown questions and special circumstances, please ask Sichuan Rongteng after-sales service. We can provide 24-hour technical support and services in any form. Contact: Sichuan Rongteng Automation Equipment Co., Ltd. Phone/WhatsApp/Wechat : +86 177 8117 4421  +86 138 8076 0589 Website: www.rtgastreat.com     Email: info@rtgastreat.com Address:No. 8, Section 2 of Tengfei Road, Shigao Subdistrict,Tianfu New Area, Meishan city, Sichuan China 620564