The skid mounted light hydrocarbon recovery unit produced by our company is a domestic complete set of equipment developed on the basis of imported equipment. So far, there are more than 40 sets. It is widely used in various oilfields throughout the country, with a processing capacity of 10000-300000 cubic meters per day. Since it was put into production, dozens of sets of equipment are now in normal operation, which fully proves the reliability and progressiveness of the equipment. 1、 Principle of skid mounted light hydrocarbon recovery unit: natural gas pretreatment (dehydration and liquid removal) - compression - refrigeration - mixed hydrocarbon fraction - production of qualified LPG and stable light hydrocarbon; refrigeration: propane refrigeration (or ammonia refrigeration) produced by the unit; refrigeration temperature: about 40 ℃; comprehensive efficiency of components above C3 + is more than 80%. The secondary refrigeration of the expander can also be increased. The refrigeration temperature is about - 90 ℃, and the comprehensive efficiency of components above C3 + is more than 96%. 2、 In order to meet different needs, the skid mounted light hydrocarbon recovery unit of our company has different specifications of 10000-300000 m3 / D to meet the margin of ± 25% of processing capacity, and natural gas power generation, gas engine, computer control system, etc. can be added according to user needs. 3、 At present, only our company produces and develops skid mounted light hydrocarbon recovery unit complete equipment in China, forming complete technologies of different specifications, establishing stable manufacturing bases and supporting manufacturers. Through years of production practice, our products are constantly improved and improved. Compared with foreign equipment, the process is more simple and practical, the equipment is more compact, and the cost is only half of that of foreign similar equipment. It has the following advantages: 1. Factory assembly and little on-site construction. 2. Skid mounted installation on site, easy to move and move. 3. The turnkey project provides the whole process service from design - Manufacturing - production - training, maintenance - after-sales service. The user only needs to complete the plant leveling and a small amount of civil work, and connect the air source, power supply and water. 4. Compared with other domestic design institutes with the same processing capacity, the cost is reduced by 1 / 3-1 / 2, and the construction period is shortened by half. 5. The practice has proved that the investment return rate of the device is very high, the performance is very good, and the general investment recovery period is not more than one year. 6. Energy saving and environmental protection. 7. Stable light hydrocarbon and LPG prices are rising, which makes the investment return of the project more obvious.   Contact: Sichuan Rongteng Automation Equipment Co., Ltd. Phone/WhatsApp/Wechat : +86 177 8117 4421  +86 138 8076 0589 Website: www.rtgastreat.com     Email: info@rtgastreat.com Address:No. 8, Section 2 of Tengfei Road, Shigao Subdistrict,Tianfu New Area, Meishan city, Sichuan China 620564